J.J.'s DN-HC4500 + Traktor Pro TSI MIDI Mapper
You have to be a registered member to download. Once you Log In, you can see the downloaded link below.
Please Login or Register to read the rest of this content.
Use the latest HC4500 Software update and the latest ASIO. If you have Windows 7 64-bit, use Denon DJ ASIO 2.1. Otherwise, use ASIO 1.01.
Firmware SYS 1006 (August 2009)
http://www.denondj.com/firmware.aspx?ProductId=81
- Create a user account here: http://www.denondj.com/denon-dj-Club.aspxYou will need the serial number of your HC handy.
- When completed, download the v1006 firmware (.zip) to a folder.
- Go to that folder and unzip the file.
- Install the updator application for PC or MAC and launch it.
- Connect DN-HC4500 to computer by USB cable.
- Push and hold these two keys and power up > [Back + Source] on the DN-HC4500.
- Drag and drop only the v1006.bin file into the Denon updator application.
- Hit load in the app.
- Hit execute in the app.
- Wait till the display says complete (about 10-sec).
- Power the DN-HC4500 down and your done.
ASIO 2.10 For Windows 7 64-bit only:
http://www.denondj.com/assets/misc/DDJAsioDrv210.zip
• 2.1 is optimized for 8in/8out
• You need it in order to run 64-bit
• You need this version if you have a DN-X1600 or DN-X1700 mixer
ASIO 1.01 For Windows 7 32-bit (XP, Vista):
http://www.denondj.com/assets/misc/DDJAsioDrv101.zip
• 1.01 is optimized for 4in/4out
• Utilizes less audio channels = smaller buffer size setting is possible
Hey JJ hope all is well with you and the new baby… Any luck on updating the new Tsi for Display support with effects????
I finally took the HC4500 out of the rack yesterday. I’ve been BETA testing the new Rane Sixty-Eight for the last month. Great mixer but it still needs improvement.
I’ve tried to post all the changes I did on the No Display TSI so I could reprogram them on the Display TSI.
The effects are pretty tricky. Mainly because when your editing, your in a different Modifier. So for every action, you have to copy it 2 other times. It will take about 2 hours just to figure where I was at, then I can start programing again djyan.
Like Smoky Robinson says, “I Second That Emotion”. Feels and looks like a dead controller with no display. We need you J.J. My money is waiting to send to you. Mobile gigs been going for me like crazy lately and would love the display. DjYan feels the same way.
How do you guys stand the constant scrolling of the artist/title?
Traktor’s display support IS the worst in the Industry.
It never bothered me at all. Just hate looking at a blank/dead screen. I’m on a MacBook pro so my computer can handle it unlike pcs
Same for me. A blank/dead screen on my Denon would feel creepy
Although i actually look at the screen of my MacBook pro all the time for 95%…
JJ, i’ve tried your tsi file for the dns-3700 but the only thing that works is the play button. But the file on the Denon site works fine,because i’ve got also an X1, i can use all the effects. But the tsi. on the Denon site is only for 2 players, how can i change them for four players, like your tsi. for the HC 4500. Also i’ve got the dnx1600, but when i change from midi to cd, it shuts down the program, so i’m using back my Maya, but my latencu is 11ms. When i would buy soundcard grom NI, would i get the latency lower, or is my computer to slow? I can also upgrade tot Traktor Scratch, so i can play with timecode with this mixer and i normally i can then change to cd’s without shutting the program. What would you recomend? It would be nice to play with two decks over 4 channels, like with my hc4500.
Just mentioning that the HC4500 Traktor Pro.pdf link is broken and can’t be found on the page, as I was trying to download the latest update of Jul 28/10.
Fixed. Thanks DJtroublet. I updated the graphic last week and forgot to update the link to the picture. The link for the PDF in the text still worked.
update to the problem is that the link works, but it also says “Page Not Found” in the header in the browser, and displays the main page. I shall check it out again when I get home from work, but something to look into possibly?
For some reason, the link got changed. I updated both links to the PDF. Refresh your web browser and let me know.
All is well again, it could have been an issue on my work computer, now that I’m home it appears to be working again. thanks.
No problems at all.
Update 2:
you should use a third line of code for each deck to enable switching between scratch mode and jog mode, and assign a button to it:
Quote:
Now overall, apart from your normally mapped controls, your Midi Config XML should contain something like this:
(FOLLOWED BY YOUR REGULAR MAPPINGS HERE)
To explain the code:
Midi Channel 8 is for left Deck, midi channel 9 for right deck
Note 89 is for “touching the platter” on either side, the platter is considered touched if a “Note on” with value >= 64 is sent.
The platter is considered released when a “note off” with value <= 63 is sent.
For the Movement: while the platter is allready touched, the platter must send CC 76 on the corresponding channel , where sending of values between 0 and 63 is backwards movement and 64 to 127 is forward movement
(waveforms move as long as something is sent. value determines speed and direction of movement)
OK guys. I get the Audio 8 in today. You know what that means? I will be able to start working on the DN-HC4500 with display support. I tried it with the new Traktor S4 but the Denon Controller support is not in that software.
What needs to be finished with display support? I’m thinking… Stop the platter from getting stuck and effects. Anything else that is missing?
Hey jj. It’s nice to hear that you’re gonna work on the display version of the tsi. There is actually one thing acting weird in the no-display tsi version, which is the effects section (maybe I’m doing something wrong).
The thing is: you activate the effect and the led becomes green; then you can switch to “adjust mode”, with an orange led and adjust the effect knob, but, I don’t know how, after that I get a red led and can’t get out of there; and nothing works as expected…did you notice that?
Thank you
To turn On the first effect, hit the effect 1 button. The LED will turn Green. Hit the same effect button to turn it off. To control effect 1 amount, Dry/Wet or to select other effects, Hold down Flip + Effect 1. The LED will turn Red or Orange if you have Effect 1 ON. From here you can: 1.Change the Effect Amount by rotating the Jog 2. Change the Wet/Dry by rotating the Parameter Knob [PM] 3. Select different FX using the [< <] or [>>] buttons. To exit Effect 1 mode, simply push FLIP or PITCH/KEY. This is taken from the HC4500 Traktor Pro.pdf that can be downloaded in the original post.
• [Effect 1] = Chained FX 1 On/O ff
• [Effect 1] = Advanced FX On/O ff
• [Flip] + [Effect] = FX Mode (LED Red when ON)
• [Flip] + [Effect] then [PM] rotate = FX Dry/Wet
• [Flip] + [Effect] then [Jog] rotate = FX 1 Amount
• [Flip] + [Effect] then [< <] or [>>]= FX Select
[Flip] or [Pitch/Key] + [E ect] = FX Mode (LED Red when ON)
Press [Flip] or [Pitch/Key] Again to Exit
Thanks for this awesome TSI mapping!
Greets from Amsterdam, Holland! We use it in clubs near rembrandsplein.
Thank you djreaper. I started work on adding effects to the display version. I believe I still need to fix the jog wheel freezing in that version.
I’ve been waiting on the Audio 8. However, even with the Audio 8 drivers, there is still a lot of hiccups in the audio… even at the highest latency. So frustrating.
Traktor Pro 2 has been announced. Do you guys want the new Sampler mapped to the DN-HC4500? If so, what buttons should we use to MAP it?
S4 has these:
Loop Recorder:
1) Record
2) Size – knob
3) Dry/Wet – knob
4) Play/Pause
5) Del
6) Undo/Redo
Sample Decks:
1) Slot Start/Stop
2) Load From List
3) Load From Deck
4) Group Play Mode
5) Clear Slot
6) Save Sample
7) Slot Gain – knob
8 ) Slot Volume – knob
9) Slot filter (on/off)
10) Slot Filter Amount – knob
11) Sample Play
12) Sample Trigger
13) Group Play
14) Group Trigger
15) Slot Mute/Unmute
16) Slot retrigger
17) Copy From Loop Recorder
18) Copy From Slot
19) Slot Play Mode (options: one shot/looped)
20) Slot Size x2
21) Slot Size /2
22) Slot Size Reset
23) Slot Phase Sync
24) Slot Scratch On
25) Slot Scratch On Direct
26) Slot Scratch [value]
27) Slot Tempo Bend (stepless)
28) Slot Tempo Bend
29) Slot Tempo Fader
TP2 may add or change something …
I hope your good old hc4500 mapping will work for Traktor 2, JJ
I will need it next month to work 100%
Will try it soon
djsteve,
I’m working on a new map for Traktor 2. NI fixed the latency problem when it outputted to the HID display. Plus, we can share channels with the new update. For instance, with just a 2 stereo output like the HC4500, we can assign Deck 1 and Deck 3 to run in Stereo Out 1.
I briefly tried the no-display version and found a few small errors while using the new Traktor 2. I would be very careful while using it.
I also plan to use the 5 Cue Points to Trigger the Samplers. I don’t know how I’m going to implement it though.
Display Support Updated 05/15/2011
Fixed: ‘Scratch ON’ for the Jog Wheel freezes the player until the Jog Wheel is touched again.
Added: ‘Deck Focus Select’ for all 4 decks. When you hit Playlist to go to Deck C (left side) or Deck D (right side), the Play, Loop (Loop ON) and Cue LED’s should return to the decks state. For instance, if you have 4 Cues on deck A, then switch to Deck C and back to Deck A, the 4 Cue LED lights should turn back on.
To Do: Effects still don’t work yet.
To Do: If the Deck is a Sample Deck, then the Cue Points will trigger the sampler’s. Flip + Cue 1 might be to add current loop to Sample Deck 1. I haven’t figured it out. I will have to look how the S4 does this.
To Do: Increase Jog Sensitivity for Pitch Bend.
JJ-
Is this update stable enough to use for a gig? I can live without effects for the time being.
It worked great on a 2 hour session I did last night. I will test again tonight and tomorrow. Traktor 2.0 changed a few things in MIDI, so it needs more testing.
I might have to tweak the Jog Wheel Scratch sensitivity. It looks like a few things are still missing like Range + PM Knob Turn for FILTER. Adding a On/Off for the effects should be easy. However, Flip + Effect 1-3 will take some time to add.
Ok sounds good, I have a pretty big gig coming up this weekend and wanted to give Traktor 2 a go since I love some of the changes they made. I’ll play around with it during the week and report back if I notice anything irregular.
Thanks,
Matt
EDIT *** This has nothing to do with the mapper in Traktor.
Blackie Lox got SSL drop native support for the 4500 on his mac. Got it to work on my Mac with MidiPipe. Pipeline looks like this:
Midi In: DN-HC4500 (“hijack” UNCHECKED)
Midi Out: MidiPipe Output 1 (“Use Note Off Velocity” UNCHECKED, “Pass Through” CHECKED)
Found error, Right side only:
Flip + Hot Cue 3-5 = Deletes and starts Hot Cue. It should just delete the Hot Cue for Deck B and D, not start the Hot Cue. Flip = Hot Cue 1-2 work fine. The Left Side (Deck A & C) work fine. I will fix and add Effects.
Deck Focus select to remember the LED’s when the layer is switched back doesn’t always work. I will do more research.
***EDIT: Found why Deck Focus didn’t remember the LED’s when the layer was switched. When hitting the Eject/Playlist button to switch layer (Modifier 2:0,1 and 6:0,1), I already programed them to disable the LED’s.
Got FX Group to Toggle On/OFF for all 4 decks. Working on FX Single now. Flip + Effect 1 = Effect Parameters will take some time (next week hopefully).
Side note: The Jog Wheel for Pitch Bend is maxed out: 300% Sensitivity and 100% Acceleration. For faster Pitch Bend, use the Pitch Bend Buttons. To adjust this, go to Preferences, Transport/ Tempo Bend: Sensitivity 0-200%. I have it set to 100% and “Tempo Bend Progressive Sensitivity” CHECKED.
This mapper is sick! I will upload tomorrow:
Fixed: Deck Focus works. Deleted previous LED off when switching Decks.
Fixed: Flip + Hot Cues 3-5 on right side. When deleting Hot Cues 3-5, it would jump to Cue instead of just deleting it.
Note: For Jog Wheel Pitch bend and Wet/Dry, the maximum sensitivity is maxed out. 300% Sensitivity and 100% Acceleration. You cannot go faster because of the Native Support.
Added:
Deck 1 = FX 1
Deck 2 = FX 2
Deck 3 = FX 3
Deck 4 = FX 4
Group Effects
• [Flip] + [Jog] rotate = F/X Dry/Wet
• [Effect 1] = Chained FX 1 On/O ff (Effect 1 LED Green)
• [Effect 2] = FX Chained E ect 2 On/O ff (Effect 2 LED Green)
• [Effect 3] = FX Chained E ect 3 On/O ff (Effect 3 LED Green)
Single Effects
• [Flip] + [Jog] rotate = F/X Dry/Wet
• [Effect 1] = Advanced FX On/O ff (Effect 1 LED Green)
• [Effect 2] = Advanced FX Button (Effect 2 LED Green)
• [Effect 3] = Advanced FX Button (Effect 3 LED Green)
Still need:
[Flip] or [Pitch/Key] + [E ect] = FX Mode (LED Red when ON)
Press [Flip] or [Pitch/Key] Again to Exit
• Flip + Effect to adjust each effect with the Jog Wheel, select effects etc.
• [Pitch/Key] + [Jog] rotate = Mixer Key Amount
• [Pitch/Key] + [PM] rotate = Move Loop 1 Bar
or
• [Pitch/Key] + [PM] rotate = Mixer Filter Amount
This will take a while…
REALLY looking forward to this, I recently moved to TP2 and my HC4500 hasn’t been the same since
Thanks for all the hard work!
I just uploaded the file. Let me know what you think.
Fixed: Cue LED on Deck A was assigned to Device Target. So when you hit Cue on Deck B, Deck A Cue would also light up RED.
Fixed: Play LED for Deck B and Deck D wasn’t assigned to the modifier layers. So when you hit Playlist to go to Deck D, it wouldn’t update the LED for that layer.
Fixed: Added correct Modifiers to Deck Focus Select. If you do Flip + Playlist = Only Browser Toggle, it would change Deck Focus without changing layers.
I also cleaned up the TSI and deleted unused assignments. I will update tomorrow.
Flip + Effect Keys will take some time.
Side Note: I forgot…
Range + Jog Wheel = Filter Amount
Range + Pitch Fader = Key Amount
Range + Back = Filter and Key at 0%
Range + Flip = Filter and Key at 0%
I am unable to do Range + PM Knob rotate = Move Loop. Native Support doesn’t allow me to program this correctly. It was very buggy. It either moved the loop or skipped you forward/backward in the song or did absolutely nothing.
hello,
I do not speak English well
for DN-HC4500, is known bpm display, instead of percentages of “pitch” in the right corner of the display,
thank you
NI Traktor handles the DN-HC4500 HID display which controls what is displayed. This means it’s not controlled by the user.
Programs like RPM can output either BPM or Percentage.
http://www.gizmolabs.net/
Hello Dj
I hope all is well, i`m new to ur page, i`ve downloaded the 4500 file for traktor.
I have an Alienware M17 XR2, with i7 920, 1 GIG ATI VIDEO CARD, 8 GIG OF MEMORY, ETC…really fully loapopded laptop, the only problem that i have after using ur file is that i have a CPU load, so i `m having pop`s etc… any idea why i`m having that, am i the only one, or it could a be bug to look at? thanx again and have a nice day
DJ
Upgrade to Traktor 2.0.2.
If you are using an older version, please use the No Display version.
Alright i`ll do so, thanx again.
I`ll keep u posted.
Dj
Hey Dj
I`m all good now, thanx.
Question pls, i`m not sure i understood right, is there an update for the 4500 tsi file that ur working on?
thanx
I just uploaded the Display Version.
Once your logged in, look at the original post and click on the link:
DN-HC4500 4 Decks 201100608
2011 = Year, 06 = Month, 08 = Day
HelloJ.J.
I need a big favor pls, i`m kinda lost, since i`ve been reading old n new posts, do u mind walking me through uploading ur file? do i need to delete something ? if yes is it befor or after uploading the file?
I`ve upgraded to the latest version of traktor, i have no more the CPU over load problems wich is great.
Thx
DJ Steve, “all your wildest dreams will come true” Tomorrow, I will upload a custom map for Stefan. This will not effect the regular mapping I’ve posted. I might add adjusting the Cue Type though.
1. 1-5 Hot Cues work by pressing them. Flip + Hot Cue 1-5 deletes them.
2. Cue Type Interaction Mode Inc/Dec doesn’t work in Traktor 2.0. I wanted to do Range + Cue 1-5 = Inc (Increase) Cue Type (Cycle through Cue Types). I entered an technical issue with NI.
http://co.native-instruments.com/forum_de/showthread.php?t=141007
However, this is what I’ve been able to do:
Hot Cue 1-5 + Cue = Cue Point
Hot Cue 1-5 + Exit/Reloop = Load Cue Point
Hot Cue 1-5 + Flip = Grid Point
Hot Cue 1-5 + Pitch Bend – = Fade-In
Hot Cue 1-5 + Pitch Bend + = Fade-Out
Hot Cue 1-5 + Range = Loop
3. With Display Mode, there is no “Famous skipping 1 time while scrolling 5 tracks”. However, in the latest Non-Display version I’ve posted, this was fixed. The PM Knob rotate in each direction was turned into two different buttons instead of a rotary knob.
4. This only works for Deck A and Deck B:
Effect 1 = Internal Mode (Int) Green LED
Effect 2 = Relative Mode (Rel) Green LED
Effect 3 = Absolute Mode (Abs) Green LED
Pushing Play on both sides resets the Internal Mode
I disabled the Hot Cues from Playing the track. If your running Abs or Rel mode, it will automatically send it into Int mode. While paused, the Hot Cues will play until you release (Stutter). You can also hold down a Hot Cue and hit Play to continue playing.
5. S4 Mapping Effect
Playlist = Only Browser Toggle (Enlarge)
PM Push = Loads song and Only Browser Toggle (Back to Previous Layout)
Even though you don’t use Deck C&D, they are still available:
Flip + Playlist = Deck C (Left Side) or Deck D (Right Side)
Make sure and go to Preferences/ Controller Manager/ Device/ Edit: and delete all previous MIDI mappings.
Fixed: Effect 1 Green LED was duplicated. It didn’t remember the last state from switching decks.
Added:
Hot Cue 1-5 + Cue = Cue Point
Hot Cue 1-5 + Exit/Reloop = Load Cue Point
Hot Cue 1-5 + Flip = Grid Point
Hot Cue 1-5 + Pitch Bend – = Fade-In
Hot Cue 1-5 + Pitch Bend + = Fade-Out
Hot Cue 1-5 + Range = Loop
I will upload tomorrow.
Dj Nadim Naoum, thank you for your donation. It is much appreciated.
Fixed:
Fixed right side Deck B and Deck D.
Pitch/Key + Jog Wheel = Mixer Filter
Need to Fix PDF:
Pitch/Key + Jog Wheel = Mixer Filter
Incorrect: Pitch/Key + PM Knob = Mixer Filter
I’m thinking about doing:
Pitch/Key + Effect 1 = Single Effect
Pitch/Key + Effect 2 = Group Effect
I’m doing more testing on Traktor 2.0.3.
JJ- Effects were able to turn on after the 6/8 version? I hit them on and nothing happens. Am I missing something?
Thanks
Matt
baconbits, the effects work in version DN-HC4500 4 Decks 20110608. Whatever effect section your on, Group or Single, it turns it on and the light turns green. Flip + Jog Wheel Rotate controls the Dry/Wet.
I will do some testing tonight and upload an updated version tomorrow.
Hi J.J.,
i’m kinda confused, so i need help. Have been working without any problems for a few years with OS X Snow leopard, traktor v.1.2.7 and your DN-HC4500 4 Decks 20100427.tsi.
Now i have a second new Mac with OS X Lion, traktor v.2.0.3 and your DN-HC4500 4 Decks 201100608.tsi and i don’t succeed in getting traktor to work with my denon-HC4500.
What i am doing wrong, am i missing some important information?
okay, finally i found it:
- opened traktor pro v. 2.0.3 prefs, imported your your DN-HC4500 4 Decks 201100608.tsi file
- Used the setup wizard en went through it.
Now it works
here i am again; using the setup wizard activated the standard traktor .tsi file i realized…
So the DN-HC4500 4 Decks 201100608.tsi file doesn’t work for me
I assume it should be. Can you help me out please? I need guidance…
Hmm, I don’t have a Mac or the latest OS X Lion to test on. I plan on ordering a few iMacs for the office though. Maybe I can test that later this month.
I know Serato doesn’t support Lion yet. How about NI Traktor? Please keep me updated.
Traktor 2 seems to work with Lion:
On the NI user forum dj paul & davscanlon have no problems:
http://www.native-instruments.com/forum/showthread.php?t=141379&page=2
- http://www.native-instruments.com/en/support/compatibility/mac-os-x-compatibility/
Serato releases scratch live 2.3. They wrote: ‘Please note: if you have a new Mac Book Pro running a 10.7 kernel, you must update to OSX 10.6.8 for a fix to hardware related crashes.’.
Should be ‘downgrade’ off course. http://serato.com/downloads/scratchlive/2.3.0/releasenotes
Hm yes, ‘update’ from 10.7 to 10.6.8….
regards.
hm, i formatted my Mac with OS X Lion (10.7.1) and installed OSX Snow Leopard (10.6.8) again, then tractor v.2.0.3 and your DN-HC4500 4 Decks 201100608.tsi file. Still not working…
Anybody who can confirm if this .tsi file should work with the latest tractor v.2.0.3 on a Mac?
hi J.J, any idea yet when you can test (edit) the ‘DN-HC4500 4 Decks 201100608′ on a Mac?
I got a couple 27″ iMac’s with LION at the office. I will download the Mac version and bring my DN-HC4500 to work and test the TSI.
ah, great! i’ll give another contribution for your effort! thank you so much!
Installed on Lion. I ran everything similar to windows. Loaded my mapper and nothing. It wouldn’t even let me add Device Mapping LEARN a new button. Added a Generic MIDI device and it let me LEARN buttons when I pressed the DN-HC4500. I noticed the In-Port and Out-Port were set to all ports. Then I went through the Setup Wizard and select manufacturer: Denon with model: DN-HC4500. Low and behold it worked. The In/Out-Ports were DN-HC4500. Deleted NI 4500 mapper. Deleted the Generic MIDI I just created. Then I noticed my mapper (DN-HC4500 4 Decks 20110608), the In-Port and Out-Port was labeled n/a: DN-H. So I selected both the In-Port and Out-Port and changed them to DN-HC4500.
Long story short. Change the In-Port and Out-Port from n/a: DN-H to DN-HC4500. The mapper worked fine for me.
thanks for your investigation! But’s in not clear to me
I have my denon conected tonight and tomorrow. I’m looking in the traktor 2.0.3 settings now at output input routing. But that does not seem to be what you explained by in-port and out port. I assume i don’t have to edit your .tsi file. Wouldn’t know how to do that. Hope you read this soon. Regards
‘What the fuck!’ i’ll play that song twice tonigt! How could i be so stupid
. After seeing your screenshot my first idea still was: ‘controller manager?, i don’t have that…’ LOL! Never have been in there for years. First time today.
Thanks a lot. Now it works!
I’ll pay you a pizza and a glas of wine!
No Problem. It took me 20 minutes to figure out what was wrong. I was very close to calling Denon (Silvio) to issue a error.
Once I update the mapper from 2.0.3, the In/Out-Port should be corrected in future TSI updates. However, Traktor 2.1.1 update is now online!
New / improved features:
Individual Keylock, FX Enable and Headphone Cueing for sample deck slots
Multi-core processor support
Automatic jogwheel calibration for Kontrol S2 and S4
New option for additional mixer headroom
ID3 v2.3 Tag compatibility
Option to disable Sample Auto-Save
Jump size display when hovering over stripe
Improved Setup Wizard
Readibility of waveform display, phase meter and level meter improved
Support for Kontrol S2
Fixes
GUI tempo fader decoupled from Scratch and Tempo Bend
Pitch Bend behavior on stopped deck fixed
Cueing accuracy of CD timecode fixed
Core Audio sample rate matching fixed
Updated October 17, 2011. Tested Great with Traktor 2.1.1
Deleted Function + Flip/Exit/Cue/PitchBend-/PitchBend+ for different Cue Points. I will add them properly later.I tried to hold down Function Key (Cues) + PM Rotary to scroll through the different Cues but it’s still inconsistent.
Added:
Hot Cue 1-5 + Cue = Cue Point
Hot Cue 1-5 + Exit/Reloop = Load Cue Point
Hot Cue 1-5 + Flip = Grid Point
Hot Cue 1-5 + Pitch Bend – = Fade-In
Hot Cue 1-5 + Pitch Bend + = Fade-Out
Hot Cue 1-5 + Range = Loop
Flip + JogWheel on right side (Deck B/D) now = Wet/Dry
Rotary Acceleration from 0% to 100% on all Jog Wheel Scratch
Rotary Sensativity from 188% to 200% for Jog Wheel Pitch Bend.
Still need:
[Flip] + [E ect] = FX Mode (LED Red when ON)
Press [Flip] Again to Exit
• Flip + Effect to adjust each effect with the Jog Wheel, select effects etc.
• [Pitch/Key] + [Jog] rotate = Mixer Key AmountI will not add this.• [Pitch/Key] + Effect 1/2/3 = Combo Effects ala Ean Goldan
This will take a while…
thanks for the update! Just donated ‘a pizza and glass of wine’ i still owned you
.
I am struggling with ‘snapping to beatgrid’ since i am using trakTor2. Although Mouse control is set to Vinyl in the ‘transport’ panel, it keeps on snapping to beatgrid…
Wel, Traktor 2.1.1 has some more issue’s described here: http://traktorbible.com/articles/problems-in-traktor-211.aspx
Lucky me, i found it: ‘You can turn it off with the small S-button in the global section. With snap, when setting a cue Traktor will jump to the closest beat grid indicator. …’ I had hidden the global section…. No bug in Traktor 2 or you .tsi
Maybe a question off topic … my laptop is a very old ‘aspire 1710′ 17inch.
This computer is not fast enough to do the trick with traktor .Latency is very big and loading off the tracks interrupts, the effects are interrupting sometimes so …
I like to buy a newer laptop just for playing around with traktor 1or2 .
Not downloading or anything else … apple mac pro should be great but certainly the most expensive one i believe so an second hand laptop should fit just in the budget …are the first buildyear 2006 mac pro still fast enough or are other laptop even good to use ?? thanks in advance …Maybe you guys can tell what specs off laptop that you are play with ?
Best Regards,
Andy
May 14, 2010 bonifacedj. THANK YOU FOR THE DONATION.
October 18, 2011 bonifacedj. THANK YOU FOR THE DONATION.
Andy,
I have a 2 year old HP laptop. slow i7 1.5 Ghz Quad Processor. I put a Intel SSD (Solid State Drive) 256 Gig and its ultra fast. Boots in 20 seconds and programs load very quickly. Fresh install of Windows 7. Optimized it using NI suggestions: http://www.native-instruments.com/forum/showthread.php?t=145510
NI just updated Traktor for Multi-core processor support.
Even though the next generation Intel processors were just released with minimal GHZ increase, they are a lot faster. I suggest getting a new laptop for $600-$800. However, I still have a Pentium 4 3.3Ghz Dell XPS from 8 years ago. I have it optimized and it runs Traktor and Scratch Live fairly well (higher latency).
Of course if you have the money, get an iMac with a SSD. I bought my wife a Mac Air for our anniversary last week. They all have SSD and that thing is fast. Everything is instant. It cold boots in 10 seconds.
Hello JJ just found a 3 year old macbook pro 17inch for about 550 euros,bemow are the specs …can i play traktor on this one with the proper latency etc … ?Nice to hear a pro’s oppinion.Thanks in advance.
Apple MacBook PRO
- 2,4Ghz Intel Core 2 Duo T7700 (2 onafhankelijke CPU-kernen op 1 CPU-chip)
- 4 GB DDR2 667Mhz (2x 2GB)
- 160GB SATA harde schijf 5400RPM
- DVDRW station UJ-45J ( 8x DL SuperDrive )
- Nvidia Geforce 8600M GT 256MB GDDR3
- 1x DVI-uitgang voor extern scherm aan te sluiten
- 3x USB 2.0 poorten, 1x Firewire “400″ poort, 1x Firewire “800″ poort
- 10/100/1000Base-T netwerkaansluiting
- 1x ExpressCard/34
- MAC OS X 10.6 Snow Leopard
- 17 inch TFT met natieve resolutie van max 1680×1050 32bit
- Batterij: zéér goed; resterend mAh: 6235mAh (=+-3u)
- AZERTY-toestenbord
- Airport Extreme kaart aanwezig (voor draadloos internet 802.11a/b/g)
- Bluetooth 2.0+EDR
100 % sure you can use that MBP. If still in doubt (since i see you’re native language is dutch), check http://www.macfreak.nl or .be
I had a MBP 15 inch from late 2008. No problem at all.
Ok thanks for all support ,bought it, now i gonna try to use it and install traktor,internet to this laptop….help me god because im no comp guru (-:
regards,
Andy.
Congrats Andy. Let us know how is goes. Did it come with the latest operating system Lion?
Hello JJ : No it has a mac Os 10.6 snow leopard system … but i can load everthing up till i must put in my serial number TRAKTOR PRO and it give an error … analyzing the probleme should be i must onload the TP programme from my old computer but that one is dead so i cannot onload the programme anymore … is there an other way ?
Best regards Andy
the other way is buying and downloading traktor from native instruments if you don’t have the original installer anymore. Seems obvious to me. What other way would there be?
i have the original disc and serial number so why should i buy a new one … i contacted NI and normally they can fix this by resetting some things …. that should be the other way boniface.
Best Regards,
Andy
So you knew the other way already!